We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin Block.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin Block Product List and Ranking from 4 Manufacturers, Suppliers and Companies | IPROS GMS

Resin Block Product List

1～7 item / All 7 items

Displayed results
Usage method for cutting resin IMP blocks.

Usage method for cutting resin IMP blocks.

Points to note when machining block materials, annealing methods, etc.

The 【IMP block】 is often used in machining, and special care is required for thin-walled or deep machining cuts. Our blocks are manufactured through injection compression, resulting in a higher density than those made by extrusion, but they have different characteristics regarding machinability compared to extruded materials. Basic points about machinability are posted on our website. *Please refer to the link below for precautions when cutting blocks (PLAMO website): https://www.plamo-k.com/service/material/cutting/

  • Company：PLAMO
  • Price：Other
  • plastic
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin block molding: Corresponding sizes and ordering information.

Resin block molding: Corresponding sizes and ordering information.

The "IMP block" is a prototype process that involves forming pelletized thermoplastic resin into block-shaped products through injection molding.

【Mold Size Available】 1: 70mm × 70mm × 30mm t 2: 205mm × 100mm × 4–55mm t (thickness can be adjusted) 3: 150mm × 150mm × 5–40mm t (thickness can be adjusted) We also accept block manufacturing from customer original molds, so please consult with us. 【Before Ordering IMP Blocks】 Block molding is accepted as a prototype, so the estimate will be based on the labor hours. We will explain the quality and risks of block moldability before your request, so please consider this with understanding. Depending on the material, we may cut to relieve stress caused by post-shrinkage, so please provide the minimum necessary block size (if you provide the product size, we will suggest the optimal mold size). *If you insist on obtaining a large size for multiple parts through machining, it may result in an inability to obtain good products. ● Annealing will be untreated, but can be accepted separately. ● Machining from the prototyped blocks can also be handled by our partner companies. ● For information on the machinability of 【IMP Blocks】, please refer to the link below and the precautions for block machining (PLAMO website).

  • Company：PLAMO
  • Price：Other
  • plastic
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin block

Resin block

This is a block made from environmentally friendly recycled plastic.

These are blocks made from recycled plastic. Please use them as foundation stones for prefabricated structures or storage sheds. "Strength" It is less likely to crack than concrete. "Raw materials" It is an environmentally friendly product made from recycled plastic generated domestically. "Water resistance" It has excellent water resistance and does not rot like wood.

  • furniture
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introducing examples of materials and achievements in resin block molding.

Introducing examples of materials and achievements in resin block molding.

From pellet material to blocks! Compatible with general catalog grades, heat dissipation grades, and filler-reinforced grades. Special grades can also be provided based on supplied materials.

Injection molding in block and plate shapes using proprietary technology. It is possible to accommodate even special grades that are not distributed as extruded materials. 【Material Examples】 PA6, PA66, MXD6-GF, PA6-GF, PA66-CF, A6T, PA12, PA46, PC/ABS, PC/PBT, PC-GF, PC diffusion, PC colored products, PC high heat, PP talc, PP-GF, ABS-GF, PEEK, PAEK-GF, POM, POM-PE, POM-GF, PPS, PPS-CF, PPS-PTFE, PPS-GF, PPE, PPE-GF, PPO, PPO-GF, PPA-GF, PBT, PBT-GF, PS, PVDF, AES, ASA, COP, PLA ● The difficulty of molding varies depending on the plate thickness and required minimum dimensions. Please contact us for details.

  • Company：PLAMO
  • Price：Other
  • plastic
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Model] Resin Block Material for Cutting Processing 'IMP Block'

[New Model] Resin Block Material for Cutting Processing 'IMP Block'

A new type of IMP block measuring 70mm × 5 to 70mm has been added. It is possible to create stable products by machining from smaller-sized blocks.

A new model has joined our IMP block lineup. 【What is the IMP Block?】 The IMP block is a cutting material that has emerged from the advantages of void control in our IMP method, and it is widely used. Leveraging the benefits of injection molding, we provide resin blocks with short lead times, small lots, and at low prices. 【Advantages of the New Model】 1. Stable production of small-sized products (not limited to IMP blocks, cutting materials can produce stable products by obtaining one product per block due to their characteristics). 2. Reduction in total costs by decreasing the weight of material removed during cutting. 3. Smaller size reduces stress during cooling, which is advantageous for preventing deformation. Our specialized website for the popular "IMP Block" has been completed. It contains various information we have accumulated so far and focuses solely on cutting materials. IMP Block dedicated URL: https://www.imp-block.com/ A link is provided below. We would appreciate it if you could take a look.

  • Company：PLAMO
  • Price：Other
  • Mold Design
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to the Technology of Manufacturing Glass Fiber Reinforced Resin Blocks (PC/PBT)

Introduction to the Technology of Manufacturing Glass Fiber Reinforced Resin Blocks (PC/PBT)

Mold-free production possible! Reinforced resin block with a glass fiber content of 30-40%!

Our company has developed a unique construction method that enables the resin block production with a mixing ratio of 30-40% using PC and PBT materials. This technology allows for the production of prototypes without molds. As a result, significant cost reductions and shortened lead times are achieved. Additionally, it can be applied to a wide range of fields, including automotive and electrical machinery, as well as construction, civil engineering, medical and welfare care, beauty, and healthcare. You can easily try it out with single items, so please feel free to contact us. 【Features】 ■ Mold-free ■ Glass fiber mixing ratio of 30-40% ■ Achieves cost reduction ■ Enables shortened lead times ■ Applicable to various uses *For more details, please refer to the catalog or feel free to contact us.

  • Contract manufacturing
  • Other Auto Parts
  • Other electronic parts
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Cube molding" - An alternative to 3D printers!

"Cube molding" - An alternative to 3D printers!

Sample prototype "new standard" no mold required, materials and colors can be selected! Machined from resin blocks!

Our company manufactures resin blocks using mass-produced materials, allowing us to provide sample products equivalent to the actual products through machining. Various material achievements available. 【Features】 ■ Cost reduction ■ Increased reproducibility ■ Shortened delivery time *For more details, please download the PDF or feel free to contact us.

  • Processing Contract
  • plastic
  • Prototype Services
  • Resin Block

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Resin Block

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.